FEATURES

• Advanced CEIRS™ Technology

• First-principle Chilled-Mirror Method

• Measures Hydrocarbon Dew Points without interference

• Industry-leading 70 ℃ Cooling Range

• State-of-the-art Cooling System

• Mirror Immune to Degradation and Contamination

• ATEX and CSA Certifications

• 4 Analog Outputs

• MODBUS Compatible

• RS-232 and RS-485 Outputs

• Ethernet Communications, Networkable

• Browser-based Communication Software

BENEFITS

• Unsurpassed Accuracy and Reliability

• Very Low Maintenance

• Very Low Operating Costs

• Does Not Require Additional Software to be Installed

• Low Power Consumption

DewPort™

Portable Water and Hydrocarbon Dewpoint Analyzer

DewPort™ is the World’s only truly portable, automated, water and hydrocarbon dewpoint measurement system. It uses the patented CEIRS™ technology to accurately and simultaneously provide both water dewpoint measurements and hydrocarbon dewpoing measurements, while distinguishing between the two. Weighing at only 15 lbs (7 Kg) and using an average of less than 30W, it offers unprecedented reliability and maintenance-free operation. This product is the perfect replacement for the cumbersome-to-use manual chilled-mirrors.

DEWPOINT DUO™

On-Line Water and Hydrocarbon Dewpoint Analyzer

Now for the first time, incorporated within a single instrument, DEWPOINT DUO™ allows simultaneous measurement of water and hydrocarbon dewpoints. This is the most advanced instrument of its kind on the market and is the culmination of several years of research and development by ZEGAZ Instruments. Certified for use in hazardous locations. DEWPOINT DUO™ is deployed on some of the largest pipelines and gas refineries in the world. DEWPOINT DUO™ carries CSA (Class I, Div.1) and ATEX/IECEX (II 2 G Ex db IIB+H2 T6 Gb) hazardous location certifications.

Z-TCE-500™

Heated / Temperature Controlled Enclosure

The Z-TCE line of heated enclosures are specifically designed for applications where temperature control of the instrumentation is needed for proper measurements.  This is typically needed where the analyzers are installed outdoors where the ambient temperature may drop below the dew point of the gas under analysis.

Z-TCE-500™ heated enclosures use the latest state-of-the-art heat transfer technologies to achieve an even, tightly controlled heat distribution within the enclosure, ensuring proper measurement.

HCD5000™

Whenever measurement of hydrocarbon dew point is needed, HCD5000™ offers the most technically advanced and robust solution.  The hydrocarbon dew point of natural gas is a critical quality parameter and needs to be measured at gas refineries, pipelines, gas storage and gas-based power plants.  HCD5000™ is the only analyzer in the world that uses the CEIRS™ technology to spectroscopically distinguish between hydrocarbon and water dew points or other contaminants.

​HCD5000™ is a feature rich analyzer that offers the gold standard for this measurement.

WDP5000™

Measuring moisture dew point is essential in the gas industry.  Most moisture analyzers that are based on lasers, aluminum oxide, or quartz crystals have to be used at low pressure and are subject to a myriad of interference from contaminants.  Regulating the pressure from process pressure down to near-atmospheric pressures introduces significant errors.  These analyzers also do not actually measure moisture dew point, but moisture content.  Then an equation is used to calculate the dew point at the process pressure.​

WDP5000™ is a ground-breaking analyzer.  It measures the actual dew point at process pressure and also reports the water content.  No pressure regulation error is encountered.  No calculations are needed.  WDP5000™ simply offers the most accurate measurement possible for this important quality parameter.