Each Magnum Pro calibration pump uses our unique patented design, utilizing a Schrader valve instead of a needle valve, dual O-rings on all pistons as well as other enhancements. These innovations have earned our calibration pumps the reputation of being indestructible.
Calibration Pumps and Accessories
MVP-600 Pneumatic Calibration Hand Pump
MVP-600
Pneumatic Calibration Hand Pump
Produces pneumatic pressure and vacuum to check calibration of gauges, switches, transmitters, and recorders. The contoured cushioned handles provide extra comfort while preventing the pump from sliding. The over-sized check valve provides smooth operation throughout the output range while the dual o-rings on all pistons ensure zero leakage. Patented Mash proof vent valve comes standard on all MVP-600s (No Needle Valve) and a non-oil based lubricant is used on all moving parts.
MP-P Pressure Calibration Pump
MP-P
Pressure Calibration Pump.
Features a Delrin® plastic handle that prevents body heat transfer from interfering with readings, as well as an oversized check valve for smooth operation. The dual o-rings on all pistons ensure zero leakage. MP-P and MP-V have been in service for over a decade and can now be found in over two thirds of all power plants. Both models will out perform any manufactured pump in it's category..
MP-V Vacuum Calibration Pump
MP-V
Vacuum Calibration Pump.
Features a Delrin® plastic handle that prevents body heat transfer from interfering with readings, as well as an oversized check valve for smooth operation. The dual o-rings on all pistons ensure zero leakage. MP-P and MP-V have been in service for over a decade and can now be found in over two thirds of all power plants. Both models will out perform any manufactured pump in it's category.
M-10 Hand Pump
M-10
Hydraulic Calibration Hand Pump
Utilizes a fully adjustable stroke control to allow for quick priming, easy pumping, and fast pressure generation up to 10,000 psi (700 bar). The ergonomically engineered handles provide extra comfort, while the patented triple filtration system ensures pump operation in spite of dirty conditions. The shatterproof reservoir and stainless steel construction guarantee leak free operation. The pump has over-sized check valves to provide smooth controlled operation.
M-80
M-80
Magnum Low Pro Volume Pressure Chamber
Capable of extremely high resolution (0.0001 psi) as it spans the range of near absolute vacuum to low pressures (30" Hg - 80 PSI). It's rugged outer housing and dual o-ring design ensures zero leakage. Not only is the M-80 bench mountable, but it’s relative light weight (3.5 lbs) makes it perfect for field use as well. Optional power drive supplied to rotate the vernier at a quicker pace in-order to speed up your calibrations
PP-4
PP-4
Magnum Pro Pneumatic Power Pump
Fluids in a transmitter or delicate system have always been a concern. East Hills Instruments introduces the only fully versatile pneumatic pump capable of generating pressure up to 4,000 psi without liquid. Two support legs fold out to stabilize the PP4 and the pump can be operated by either foot or hand. The fine vernier control allows the pressure to be finely adjusted and sealed off to prevent slow leaks.
Winchester Engineering has rapidly become the digital gauge of choice. A single Winchester Engineering Gauge will replace up to seven competing gauges. Less gauges means fewer gauges to calibrate and maintain each year. Model 1 uses patent pending technology to maintain .1% of reading accuracy from absolute vacuum to 3000psi. This will eliminate costly mistakes due to over-ranging.
Model 1
The Model 1 will replace the need to use many gauges of different ranges to achieve and maintain high accuracy. Model 1 also functions as an absolute pressure gauge. The auto-ranging technology uses multiple piezoresistive sensors to read the entire range using just one gauge where it would otherwise require up to seven of our closest competitors digital gauges. Certification costs are lowered by reducing the number of gauges. It’s rugged, shockproof design comes equipped with a protective rubber housing. Large, easy-to-read, one-line display with vibrant backlight is perfect for any light condition.
+/- 0.1% accuracy of reading , +/- 0.01% fs, +/- one digit from absolute zero to 3,000 psi
Model 2 Wide Range Digital Gauge™
Model 2
Like the Model 1, the Model 2 will replace the need to use many gauges of different ranges to achieve and maintain high accuracy (0.05% f.s.) throughout a wide span (2,500-10,000 psi). The need for multiple gauges is eliminated. The Model 2 is explosion proof and fully temperature compensated. It has a large, vibrant one line display. It is housed in a high impact, sturdy case with an optional rubber boot for additional protection. Model 2 runs on three AA batteries. This gauge is destined to become the standard of the industry!
0.05% of full scale from 0 to 10,000 psi
M-Series Analog Gauge
M-Series Analog
The protective rubber boot will ensure it the best protection from the rugged life inside the power plant
Applied Resource Inc. has over 20 years of microelectronic design, engineering and manufacturing experience in the process control and instrumentation industry. A.R.I. was directly involved early on with designing a vast number of technologically advanced instruments for such companies as; Ashcroft, Heise, Moore Industries, Beta-Hathaway, Transcat Inc. Today it continues to manufacture and sell worldwide under the A.R.I. brand name as well as private labeling its products to a number of other manufactures.
Loopy 5000
The Loopy 5000 provides field technicians with a portable, economic, and durable 24VDC power source for powering field transmitters. This is especially useful during plant startup, shutdown, and overhaul, when the loops are not usually energized, but field instruments must still be installed, tested, and calibrated.
The Loopy 5000 offers superior portability from the palm of your hand to your shirt pocket.
Efficient switching regulator allows LPS to extract virtually 100% of available battery power.
Accidental short circuits are protected by a Positive Temperature Coefficient thermistor.
Can power any 4-20mA loop.
A must have for any field technician’s tool bag.
No need to run wires. Great for powering within environmental chambers.
Size: 3.8″x2.4″x0.9″ powered by one (1) 9 volt battery
Compare to Transcat Model #21050E Loop Power Supply
Loopy 6000
The Loopy 6000 provides field technicians with a portable, economic, and durable 24VDC power source for powering field transmitters. This is especially useful during plant startup, shutdown, and overhaul, when the loops are not usually energized, but field instruments must still be installed, tested, and calibrated.
The Loopy 6000 offers extended battery life designed to operate for a
month under daily use.
Efficient switching regulator allows LPS to extract virtually 100% of available battery power.
Accidental short circuits are protected by a Positive Temperature Coefficient thermistor.
Can power any 4-20mA loop.
A must have for any field technician’s tool bag.
No need to run wires. Great for powering within environmental
chambers.
Size: 5.8″x3.6″x1.3″ powered by four (4) AA batteries
Compare to Transcat Model #21052E Loop Power Supply